The hardware powering Faithlife has seen a massive transformation in the last eighteen months. We’re really excited about all the cool new changes, and the measurable impact they’ve had on our employees, customers, and the products / features we’re able to offer. Given that, we thought that sharing our hardware configuration was a fun way to live our values and showcase what we think is pretty cool.
At Faithlife we value smart, versatile learners, and automation, over expensive vendor solutions. Smart, versatile learners don’t lose value when technology changes or the company changes direction, vendor solutions often do. If we can use commodity hardware and free open source software to replace expensive vendor solutions, we do.
Commodity hardware is generally re-configurable and reusable, and lets us treat our hardware like Lego Bricks. Free open source software allows us to see behind the curtain, and more easily work with other existing tools. We’re empowered to fix our own issues by utilizing the talent we already employ, not just sit on our hands waiting for a vendor support engineer to help us out (though we do like to keep that option available when possible). Additionally, combining commodity hardware with automation tools like Puppet, we’re able to be nimble.
By being nimble, leveraging in house talent, Lego Brick-ish hardware, and free open source software, we’re able to save a considerable amount of cash. Saving cash on operational expenses enables us to make business decisions that would have otherwise been cost prohibitive. At Faithlife we have large company problems, with a small company budget.
Not long ago we were exhausting a variety of Cisco, and F5 1Gb network gear. Bottlenecks were popping up left and right, packet loss was high, retransmits were through the roof, and changes to network hardware happened at a glacial pace. We were beyond the limits of 1Gb, our topology was problematic, and shortcuts were continually being taken in order to keep up with the demand of our sites and services. At the same time, we had just begun the process of moving to Puppet and automating our server deployments, which meant we could easily outpace network changes. Additionally, the gear did not a fit our hardware philosophy.
We use OSPF to route traffic between cabinets and a pair of leaf switches are placed in each cabinet. The leaf switch pairs represent a layer 2 boundary and allow us to MLAG our servers to maintain switch redundancy within the layer 2 boundary. In addition, a pair of spine switches are placed in an end of row networking cabinet. We have multiple edge routers and firewalls connected to an area border router via OSPF. Furthermore, the edge routers are connected to ISPs via BGP.
- 32 Ports of 40Gb QSFP+
Leaf / Area Border Router
- 48 Ports of 10Gb SFP+ plus 4 ports of 40Gb QSFP+
Penguin Arctica 4804i — running Cumulus Linux
- 48 Ports of 1Gb plus 4 ports of 10Gb SFP+
Edge Router / Firewall
Dell R610 1U Servers:
- Dual Intel X520-DA2 NIC with Intel SFP+ optics
- Dual Intel X5650 CPU
- 96GB of RAM (Helps with Internet routing tables, IPS, firewall states, etc.)
Amphenol 10Gb SFP+ DAC
Amphenol 40Gb QSFP+ DAC
FiberStore multi-mode fiber
FiberStore 10Gb SR Optics
Intel 10Gb SR and LR Optics (for compatibility with X520-DA2 cards)
Seattle Data Center Network Cabinet
(please excuse the screwdriver and loose fiber, this was a work in progress at the time)